ARTEC EDGE BLENDER W/MAGNETIC

Artec EDGE-BL Preamp Blender System with Piezo & Magnetic Soundhole Pickups The EDGE-BL has a Blender EQ and basic controls of Bass, Middle, Treble and Presence. Through the AUX-INPUT jack at the bottom a Condenser Microphone or Soundhole Pickup can be connected. This pack contains both an undersaddle piezo pickup and a magnetic soundhole pickup. Also the sound from another source can be plugged in. The Blender can control the mixing balance of the piezo sound from 4-band EQ, and the sound from AUX-Input. The Phase switch on the panel is applied to piezo sound only, therefore this can give the additional choices about Plus-Mixing or Minus-Mixing of piezo pickup sound and AUX sound. This enables you to create great tone variations. Features: 4-Band EQ - Bass, Middle, Treble & Presence Controls Master Volume output level Blend the mix ratio between Piezo and AUX Phase Reverse Switch to reduce feedback Tone Switch creates a High cut of AUX sound to make soft tones Low Battery check LED Tuner Switch Chromatic tuner LEDs - Flat, OK & Sharp Pack includes: Artec EDGE-BL Pre-amp with On-board Blender System Artec Piezo pickup Artec MSP-50 Magnetic Soundhole Pickup Input jack 9V Battery; Specifications: Power Supply: 9V Alkaline Battery Battery Life: Over 1000 hours (without head set) Bass control range: ±10 dB Middle control range: ±10 dB Treble control range: ±10 dB Low Battery check at 5.0 V Piezo pickup Input Jack: 2.5 mm Mono Jack Magnetic pickup Input Jack: 3.5 mm Mono Jack (EDGEBLMG)